Back to Blog
WiFi Solutions10 min read

How to Get WiFi in Every Room of Your House: A UK Homeowner's Guide

Z

Zak

20th October 2026

Strong WiFi in the lounge, nothing in the loft office. Video calls freeze upstairs, the garden room is a black spot, and the kids' rooms are a constant argument.

Getting WiFi into every room isn't about buying the most expensive router. It's about understanding where your signal drops, then putting the right equipment in the right places. This guide takes you through it step by step, using the same process we follow for every home WiFi installation.

Blue network cable plugged into a home routerBlue network cable plugged into a home router

Key Takeaways

  • Test before you buy anything. Measure speed in each room so you know where the problem really is.
  • Router placement matters. A router in a cupboard by the front door can't reach the back of the house.
  • WiFi struggles through thick walls, floors, foil-backed insulation and metal.
  • For reliable coverage in every room, connect extra WiFi points back to the router by cable.

Step 1: Check It's a WiFi Problem, Not a Broadband Problem

Plug a laptop directly into your router with a network cable and run a speed test. Then stand next to the router and test on WiFi.

  • Slow even on cable? The problem is your broadband. Speak to your provider.
  • Fast on cable and near the router, slow elsewhere? Your broadband is fine. The problem is how the WiFi reaches the rest of your home, and that's what this guide fixes.

Step 2: Map Your Dead Zones

Walk round the house with your phone and run a speed test in every room, including the garden office, the loft and the kitchen. Note the download speed in each.

You'll quickly see a pattern. Most homes have one or two "good" rooms near the router, and coverage collapses past a particular wall, floor or staircase.


Step 3: Move the Router (If You Can)

Routers send signal out in all directions, so a router at one end of the house wastes half its coverage on the street or the garden.

If you can:

  • Put the router as central as possible, and up off the floor.
  • Keep it out of cupboards, away from the TV and away from metal and mirrors.
  • Don't hide it behind the sofa or inside a cabinet.

In many UK homes, though, the broadband comes in by the front door, and moving the router means running a cable. That's often the point where it's worth thinking about a proper setup instead.


Step 4: Understand What's Blocking Your Signal

Some materials let WiFi through easily. Others stop it almost dead:

MaterialEffect on WiFi
Stud walls and plasterboardSmall loss
BrickModerate loss
Thick stone or solid walls (common in older homes)Heavy loss
Concrete floors and ceilingsHeavy loss
Foil-backed insulation and plasterboardVery heavy loss
Metal, mirrors, radiators, fridgesBlocks and reflects signal
Underfloor heatingHeavy loss between floors

Older properties across Bristol, Bath, Somerset and Devon often have solid stone walls. New builds are no easier, because foil-backed insulation is excellent at stopping WiFi. Garden offices are usually insulated with foil-faced boards too, which is why they so often get no signal at all.


Step 5: Choose the Right Way to Spread the Signal

Once you know where the gaps are, choose how to fill them. In order of reliability:

  1. Wired access points: ceiling-mounted WiFi points cabled back to your router. The most reliable WiFi you can have.
  2. Mesh with a wired backhaul: mesh units connected back by cable. A strong option for most homes.
  3. Wireless mesh: no cables needed, but each wireless hop costs speed.
  4. Extenders: cheap, but they repeat a weak signal and can halve your speed. Best avoided for whole-home WiFi, as we explain in Why WiFi Extenders Don't Work.

We compare these in WiFi Extender vs Mesh vs Wired Access Points.


Step 6: Plan Where Each WiFi Point Goes

Home office desk with three monitors set up for working from homeHome office desk with three monitors set up for working from home

As a rough guide:

  • One access point per floor in a typical semi-detached or terraced house.
  • An extra point for a large open-plan space or a long, narrow house.
  • A dedicated point for the home office, so your work calls never compete.
  • A separate point for the garden office or outbuilding, fed by a buried outdoor-rated cable.

Mount access points centrally on the ceiling where you can. They spread signal downwards and outwards, rather than into a wall.

White WiFi access point mounted on a ceiling cable trayWhite WiFi access point mounted on a ceiling cable tray


Step 7: Set Up One Network for the Whole House

Use one WiFi name and one password across every access point or mesh unit. Your phone then moves between them as you walk round, instead of clinging to the router downstairs.

Turn off your ISP router's own WiFi if your new system takes over, so the two don't interfere. For the rest of the settings that matter, see Home Network Best Practice, and if you're running cables yourself, follow our step-by-step home network guide.


Getting WiFi to a Garden Office

Garden offices deserve their own mention. They are usually too far from the house, behind an external wall and wrapped in foil insulation. Extenders and mesh rarely cope.

The reliable fix is a network cable run from the house to the garden office, using outdoor-rated, direct-burial or ducted cable, with an access point inside. For longer distances, a point-to-point wireless bridge between two outdoor units is a good alternative.


Frequently Asked Questions

Why does my WiFi not reach upstairs?

Floors are one of the biggest barriers to WiFi, especially concrete floors or underfloor heating. A router on the ground floor at the front of the house often can't reach the back bedrooms. Adding a WiFi point upstairs, cabled back to the router, fixes it.

How many access points do I need?

Most homes need one per floor, plus extras for large open-plan areas, home offices or outbuildings. A survey tells you exactly.

Will a new router fix my dead zones?

Sometimes slightly, but rarely completely. A single router, however powerful, still has to push its signal through the same walls and floors.


Where Conxiea Fits

We survey your home, show you exactly where the signal drops, then install wired access points so every room is covered. It's one fixed price with a no-fix, no-fee guarantee, for homes across the South West.

Get a free home WiFi survey →


Related Reading

Leave a Comment

Need Expert Help with Network Automation?

Let's discuss how we can help transform your network infrastructure

Schedule a Consultation