How Much Does Business WiFi Installation Cost in the UK?
Zak
4th July 2026
Business WiFi installation costs are one of the most searched, and most poorly answered, questions in UK IT procurement.
Most of the information available either gives vague ranges without context, focuses only on hardware costs while ignoring installation and ongoing management, or is written by vendors with a product to sell.
This guide gives you an honest, transparent breakdown of what business WiFi installation actually costs in the UK in 2026, including hardware, cabling, installation labour, software licensing, and ongoing management, so you can budget accurately and evaluate quotes with confidence.
Engineer costing out a business WiFi installation project with access point hardware
Why There Is No Single Answer
Before getting into numbers, it is worth being direct about why business WiFi installation costs vary so widely: the range of requirements is enormous.
A small professional services office with 15 staff in a modern open-plan space needs two or three access points, straightforward cabling, and a basic cloud management setup. A multi-floor warehouse with 80 staff, dense device requirements, complex RF propagation challenges, and strict security segmentation needs fifteen or more access points, significant cabling infrastructure, and a more sophisticated management and monitoring solution.
The hardware, installation time, and complexity are completely different. Any guide that gives you a single number without understanding your environment is not giving you useful information.
What this guide does instead is break down each cost component so you can build a realistic estimate for your specific situation.
The Five Cost Components of Business WiFi Installation
1. RF Site Survey
Typical cost: £500 to £2,000
A professional RF site survey is the starting point for any properly designed business WiFi deployment. An engineer assesses your physical environment, building layout, construction materials, interference sources, existing cabling infrastructure, device density requirements, and produces a design that specifies where access points should be placed, what hardware is appropriate, and what cabling infrastructure is needed.
Skipping the site survey is one of the most common reasons business WiFi deployments fail to deliver the expected performance. Dead zones, coverage gaps, and capacity problems that require expensive remediation after installation are almost always the result of deploying hardware without a proper design.
The cost of a site survey pays for itself by ensuring the hardware you purchase is the right hardware, placed in the right locations. It is not an optional extra, it is the foundation of a reliable deployment.
Some professional installation companies include a free site survey as part of a full project quotation. If a company is unwilling to survey your premises before quoting, that is a red flag.
2. Access Point Hardware
Typical cost per access point: £100 to £1,000+
Access point hardware costs vary significantly depending on the platform and performance tier you choose:
Budget tier, TP-Link Omada: £100 to £200 per AP. Strong performance for SMB environments, no annual licensing fees, good cloud management platform. A sensible choice for smaller deployments where cost is a primary consideration.
Mid-tier, Ubiquiti UniFi: £150 to £400 per AP. Excellent performance and feature set, strong community and support ecosystem, no per-device licensing fees. The most popular choice for UK SMB deployments and MSPs due to its value-to-performance ratio.
Premium tier, Cisco Meraki / Aruba: £400 to £1,000+ per AP. Enterprise-grade performance, advanced management and analytics features, and extensive vendor support. Meraki in particular requires annual cloud licensing at approximately £150 per AP per year, a significant ongoing cost that needs to be included in total cost of ownership calculations.
How many access points do you need? A rough guide is one access point per 20 to 30 users in a standard office environment, or one per 30 square metres in open-plan spaces. High-density environments, conference rooms, warehouses, retail spaces with heavy device loads, may need more. Complex buildings with multiple floors, thick walls, or significant RF interference will also require more APs than a simple floor area calculation suggests.
As a practical guide:
- Small office, 10 to 20 staff: 2 to 4 access points
- Medium office, 20 to 50 staff: 4 to 8 access points
- Large office or multi-floor, 50 to 150 staff: 8 to 20 access points
- Warehouse or complex environment: site survey required
3. Cabling Infrastructure
Typical cost: £100 to £200 per cable run
Each access point requires a dedicated Cat6 or Cat6A cable run from the AP location back to your network switch. In a new-build or recently refitted office, this cabling may already be in place. In older buildings, particularly the Victorian and Edwardian properties common across UK commercial estates, cabling routes can be complex and labour-intensive.
Each cable run in a commercial environment typically costs £75 to £200, inclusive of materials, labour, containment trunking, and certified testing. Complex routes through solid walls, multiple floors, or out-of-hours installation requirements will push costs toward the higher end.
If you are also upgrading your switching infrastructure to support Power over Ethernet, which is required to power ceiling-mounted business access points, a PoE switch for a small to medium deployment adds £200 to £1,000 depending on port count and specification.
4. Installation Labour
Typical cost: £500 to £2,000
Engineer time for mounting access points, running and terminating cabling, configuring the network, and testing the installation typically costs £500 to £2,000 for a small to medium deployment, depending on project scale and complexity.
Most professional installations are completed within one to three days for a single site, with minimal disruption to operations when scheduled appropriately. Out-of-hours installation, for businesses that cannot accommodate disruption during working hours, will add a premium to labour costs.
5. Software Licensing and Ongoing Management
Typical cost: £0 to £150 per AP per year for licensing; £10 to £30 per AP per month for managed services
This is the cost component most frequently omitted from initial WiFi installation quotes, and the one that can most significantly affect total cost of ownership.
Cloud management licensing: Platforms like Ubiquiti UniFi and TP-Link Omada have no per-device licensing fees. Cisco Meraki requires annual licensing at approximately £150 per AP per year, for a 10-AP deployment, that is £1,500 per year in licensing alone, in addition to hardware costs.
Managed service fees: If you choose to have your network professionally monitored and managed after installation, rather than managing it in-house, expect to pay £10 to £30 per access point per month. This typically covers 24/7 monitoring, proactive fault detection, firmware management, configuration changes, and helpdesk support.
For a 10-AP deployment on a managed service at £20 per AP per month, that is £200 per month or £2,400 per year in ongoing management costs. This needs to be weighed against the cost of internal IT resource to manage the network, and the cost of downtime if problems are not caught and resolved promptly.
Cost breakdown of a business WiFi installation project including hardware, cabling, and labour
Total Cost Estimates by Business Size
Bringing all five components together, here are realistic total cost estimates for business WiFi installation in the UK in 2026:
Small Office (10 to 20 Staff, Single Floor, 2 to 4 APs)
- Site survey: included in project quote
- Hardware (mid-tier): £400 to £1,200
- Cabling (2 to 4 runs): £200 to £600
- Installation labour: £500 to £800
- Total project cost: £1,100 to £2,600
Medium Office (20 to 50 Staff, Single or Double Floor, 4 to 8 APs)
- Site survey: £500 to £750
- Hardware (mid-tier): £800 to £2,400
- Cabling (4 to 8 runs): £400 to £1,200
- Installation labour: £800 to £1,500
- Total project cost: £2,500 to £5,850
Large Office or Complex Environment (50 to 150 Staff, 8 to 20 APs)
- Site survey: £750 to £2,000
- Hardware (mid-tier): £1,600 to £6,000
- Cabling (8 to 20 runs): £800 to £3,000
- Installation labour: £1,200 to £2,500
- Total project cost: £4,350 to £13,500
These ranges reflect mid-tier hardware (Ubiquiti UniFi) without premium licensing costs. Projects using Cisco Meraki or Aruba hardware will be at the higher end of the hardware range, with additional annual licensing costs on top.
The Managed WiFi Alternative: CapEx vs OpEx
For businesses that prefer not to make a significant upfront capital investment, managed WiFi as a service offers an alternative model that converts the entire cost, hardware, installation, monitoring, management, and refresh, into a predictable monthly subscription.
Managed WiFi pricing in the UK typically runs on a per-site or per-access-point basis. For SMB deployments, expect all-inclusive monthly costs in the range of £150 to £500 per month for a small site, scaling with the number of access points and the SLA level required.
Over a 5 to 7 year horizon, which is the typical hardware lifecycle for business WiFi equipment, managed WiFi often delivers a lower total cost than outright purchase once all hardware, licensing, management, and refresh costs are properly accounted for. The additional benefit is that hardware refresh is handled by the provider, so you are always running current-generation equipment without a capital expenditure decision.
What Affects Your Quote Most
When you receive quotes from WiFi installation companies, these are the factors that will most significantly affect the price:
Building construction, solid brick, concrete, or stone buildings require more access points to achieve the same coverage as modern open-plan spaces, and cabling routes are more complex and labour-intensive.
Number of access points, the single biggest driver of hardware and cabling cost. A well-designed network with the right number of appropriately placed APs performs better and costs less to maintain than an over-provisioned one.
Hardware platform, the gap between budget and premium hardware is significant. For most UK SMB deployments, mid-tier hardware delivers the best value-to-performance ratio.
Licensing model, platforms with no annual licensing fees (UniFi, Omada) have a substantially lower total cost of ownership than platforms with per-device annual fees (Meraki) over a 5 to 7 year lifecycle.
Out-of-hours installation, if your business cannot accommodate installation during working hours, expect a premium of 25 to 50% on labour costs.
Red Flags in WiFi Installation Quotes
When evaluating quotes from installation companies, watch out for:
No site survey, any company quoting without surveying your premises is guessing at AP count and placement. The result is often an under-specified installation that requires expensive remediation.
Hardware-only quotes, a quote that lists access point costs without cabling, installation, and configuration is not a complete project cost. Make sure you are comparing like for like.
No mention of licensing costs, if a quote specifies Cisco Meraki hardware without including annual licensing costs, the ongoing expense will be a surprise. Always ask for the total cost of ownership over 3 to 5 years, not just the installation cost.
No post-installation survey, a professional installation should include a post-installation RF survey confirming that signal strength, throughput, and roaming behaviour meet specification before handover. If this is not included, you have no guarantee the installation performs as designed.
Summary
Business WiFi installation costs in the UK vary from around £1,100 for a small single-site office to well over £13,000 for a large or complex environment, before ongoing management costs.
The most important factors are the number of access points required (driven by building size, construction, and user density), hardware platform choice, and whether you include professional ongoing management or handle the network in-house.
The cheapest installation is not always the best value. A properly designed, professionally installed network that performs reliably for 5 to 7 years with minimal IT overhead costs significantly less over its lifetime than a poorly designed one that requires frequent remediation and generates IT support overhead.
How Conxiea Can Help
Conxiea works with UK businesses and MSPs to design and deploy business WiFi infrastructure that performs reliably and scales with your business. We provide transparent, fully itemised quotes covering every cost component, no hidden extras, no surprises.
Get in touch for a free consultation and no-obligation quote →